Fall Maintenance Service
The following is included with your Fall Maintenance Service for your heating and cooling equipment.
- Inspection and adjustment of belts as needed
- Inspection of gas valve and connections*
- Check of combustion air vents to verify they are clear and free*
- Inspection of heat exchanger for corrosion or signs of stress*
- Check of burners*
- Cleaning and test of ignition assembly*
- Monitoring of flue draft*
- Safety controls test
- Measuring of capacitors to be within spec’
- Lubrication of motors as needed
- Check and adjustment of thermostat calibration
- Check and tightening of high voltage connections
- Check and tightening of control wiring and connections
- Check of air flow
- Check of filter condition and size
- Measurement for proper air temperature readings
- Inspection of duct connections at unit
- Check of indoor fan motor bearing wear
- Check of refrigerant levels**
- Check of starting capabilities**
- Testing of defrost control**
- Check of Crankcase Heater operation**
- Monitoring for proper operation
* = Gas heat system
**= Heat pump system
